|
|
Post by eppie on Nov 5, 2002 14:38:55 GMT 1
Hi everybody.
On the Zetorworld forum, Dave from the U.K. asked me what revs are safe to let his 5245 run at.
This made me wonder: What are experiences for tweaked rev engines by you? I've heard the MB Trac from one of the mr. Sutton's running at 2850 rpm.
|
|
|
|
Post by F6L913 on Nov 5, 2002 17:51:25 GMT 1
Maybe is not the same but the old Deutz-Fahr DX run at 2200-2300 rpm but the same engine in a combine can run at 2600-2800 with no probrem. My combine runs at 2600 RPM with a F6L913  Don't know what will happen in the gearbox of a DX if the engine turns at 2600 RPM  |
|
|
|
Post by eppie on Nov 5, 2002 18:01:58 GMT 1
Yeah, and the pro stock tractorpullers rev them at 4500 rpm...
I was wondering what this does to your pistons, i mean wear.
Ours runs at 2600 rpm
|
|
|
|
Post by Woodbeef on Nov 5, 2002 18:18:59 GMT 1
Hey Renze,
What does Zetor say for revs in the specs?
|
|
|
|
Post by eppie on Nov 5, 2002 18:25:06 GMT 1
The rev clock says 1300-2200 is green, 2200-2400 is orange, 2400-2800 is red.
Originally, they are supposed to deliver full power at 2200 rpm, idle (i mean no load, full throttle) at 2400 rpm.
|
|
